Tilta - sivu 4

- Custom Designed for the Sony ZVE-10 Camera Body
- Mount Accessories via 1/4"-20 Threads and a Cold Shoe Receiver on the Bottom Plate
- Accessible Design Maintains Easy Access to Camera Ports, Function Buttons, and Battery Compartment
- Highly Compatible with Accessories like Sony ECM-W2BT & Wireless Shooting Grip
- Lightweight Design Greatly Improves Functionality while Maintaining a Compact Form Factor

For the Khronos iPhone 15 Pro and Pro Max Case

Materials: Nylon

TILTA Wooden Handle 2.0 Arri Alexa Mini R/S Ca nc Nucleus-m

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.

Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Weight: 0.09lbs
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy

When configured with the Gravity G Series Dual Pistol Grip Battery Handles, an operator can extend the G1/G2/G2X gimbal body’s operating life with eight fully charged 18650 batteries (4 in each handle). This will give up to 20 hours of power to your gimbal. If used in conjunction with the G1/G2/G2X Battery Pistol Grip Handle, up to 30 hours of runtime can be achieved.

This camera cage provides complete protective armor for the Panasonic GH4, GH5, and GH5S cameras. It provides several 1/4”-20 and 3/8”-16 mounting points as well as two cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Panasonic GH Series cage includes: the base Panasonic GH Series cage, quick release top handle, Tilta Hand Strap, Arca and Manfrotto quick release baseplates, a 15mm LWS baseplate for mounting accessories (as well as a single 15mm rod mounting clamp), an HDMI male to HDMI female cable, as well as a clamp to attach the HDMI cable comfortably to the cage and a clamp to attach both the HDMI and Nucleus Nano R/S cable comfortably to the cage.

- Protective Armor Prevents Wear & Tear on DJI Osmo Action 3 Camera Body
- Filter Ready Design Supports Optional Polarizer, ND, and MCUV Filters
- Quick Release Dual Sided Design Offers Easy Access to the Camera and Battery Compartment
- Lightweigt Design Improves Functionality without Adding Unnecessary Bullk
- Durable Aluminum and Stainless Steel Construction

Tilta TA-T23-HCC-B. Tuotteen leveys: 95 mm, Tuotteen syvyys: 47 mm, Tuotteen korkeus: 109 mm

Tilta TA-T01-FCC-G kameran suojakotelo 1/4, 3/8" Harmaa

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras.

It provides several 1/4”-20 mounting points as well as two cold shoe mounting points.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4), and finally the Tiltaing Side Power Handle with Run/Stop Type I (F570 Battery) along with the compatible Fujifilm X series R/S cable.

Compatible with Type II Baseplates and Type I Side Handles.

- Includes a top plate with a shoe mount
- Four rosette mounts
- 1/4"-20 and 3/8"-16 accessory threads
- Multiple 1/4"-20 mounting threads for optimal balancing on gimbals
- Proprietary adapter plate included for attaching to the optional Tilta 15mm LWS Baseplate for RED KOMODO Cage by quick release

This backing for the MB-T12 matte box allows you to clamp the matte box onto lenses within a given front diameter.

1. (1) 19mm dovetail plate
2. (2) Hand grips can be rotated 360 degrees from the Rosettes
3. High density foam handle for better support and stability
4. Quick Release Shoulder Pad (only compatible with the TILTA Alexa Mini baseplate)
5. (2) Side arms
6. Hard Shell Case
7. Great for handheld camerawork with any camera system

TECHNICAL DETAILS
Color: black
Material: aluminum-alloy

Tilta MB-T05. Tuotteen väri: Musta, Materiaali: Alumiini, Hiilikuitu, Ruostumaton teräs, Pakkauksen sisältö: 1. Aluminum-alloy body 2. (2) 4×4 filter frames 3. (2) Filter stages, one of which is 360 degree.... Tuotteen leveys: 342,9 mm, Tuotteen syvyys: 266,7 mm, Tuotteen korkeus: 114,3 mm. Sisältyvien tuotteiden lukumäärä: 1 kpl, Pakkauksen paino: 1,36 kg

Tilta TA-SH1-97-G. Tuotetyyppi: Kahva, Tuotteen väri: Harmaa, Materiaali: Alumiini, Ruostumaton teräs. Tuotteen leveys: 190,5 mm, Tuotteen syvyys: 139,7 mm, Tuotteen korkeus: 88,9 mm. Sisältyvien tuotteiden lukumäärä: 1 kpl• Kahva• Materiaali: Alumiini, Ruostumaton teräs• Harmaa

Tilta RS-TA-SYA videovakauttajan lisätarvike Ohjauskaapeli Musta Kupari, Ruostumaton teräs 1 kpl a6/a7/a9/a7sIII, FX3, A1

Tilta RS-TA-RD1 videovakauttajan lisätarvike Ohjauskaapeli Musta Kupari, Ruostumaton teräs 1 kpl RED Camera

Tilta MB-T15-TF. Tuotetyyppi: Kiinnityspuristin, Tuotteen väri: Musta, Materiaali: Hiilikuitu. Sisältyvien tuotteiden lukumäärä: 1 kpl• Kiinnityspuristin• Materiaali: Hiilikuitu• Musta

Tilta TA-LSP8-B kameran asennustarvike Kahva

- Custom Design for the Canon R7 Camera Body
- Mount Accessories via Cold Shoe, NATO, and 1/4"-20 Threads with Locating Points
- Arca Baseplate Supports 15mm Rod Based Accessories and Quickly Transitions to DJI Ronin
- Cable Clamp Secures HDMI and USB-C Cables via Thumb Screws for Stable Data Transmission
- NATO Top Handle Expands Mounting Options while Improving Flexibility for Operating & Handling

Tilta Nucleus-M Wireless Lens Control System Partial Kit III
The Tilta Nucleus-M Wireless Lens Control System Partial Kit III contains the essential elements for pulling focus wirelessly while handholding. The kit includes the Nucleus-M left handgrip controller, one Nucleus-M motor, one removable lens belt, two motor power cables, and a battery charger unit (batteries not included). The handgrip controller provides wireless fingertip lens control while functioning as handgrip support for your camera rig, and the system enables pulling either focus, iris, or zoom on your lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belt to add gears to your lens.

This partial kit is a single axis system, but the Nucleus-M left handgrip controller will allow you to control additional motors (not included) so you can control more than one lens ring. The included motor power cables allow you to power a motor from either a D-Tap power source or a second motor via the 7-pin to 7-pin connector. The included power cables allow you to easily add a second motor (not included) to the system. The included rosettes aid in mounting the handgrip controller to your camera or rig with ARRI-style rosettes. The system can wirelessly pull focus from up to 1000' away, and with separately available batteries you can power the hand unit for approximately 10 hours on a single charge.

For iPhone 15 Pro and Pro Max

Tilta TGA-RCK videovakauttajan lisätarvike Etäohjauksen pakkaus Musta Alumiini, Terästä 1 kpl DJI RS2, RS3 Pro

Tilta TGA-PPP-V videovakauttajan lisätarvike Akkulevy Musta Alumiini, Terästä 1 kpl DJI Ronin RS 2