Unidrain - sivu 16

The set consists of a front, side and back profile that are mounted into wooden joists using screws. The drain unit is inserted into the profile and ”clicks” into place.

Ensures correct positioning and fixing of the drain unit in wooden floor joist structures.

Pedal bin with soft open/close lid, non-slip rubber ring at the bottom and specially designed pedal to ensure stability during use. The lid design prevents it from hitting the wall when opened. Removable insert with double-sided tape makes it easy to fit binbags inside. The bin’s mechanical parts are all on the inside, facilitating easy cleaning. A roll of binbags included. Volume 4 l.

Toothbrush holder with a focus on hygiene. With a two-part insert, where one compartment holds the toothpaste tube in place, while the other is for the toothbrushes. The design ensures that the toothbrushes do not touch each other. The insert can be easily removed during cleaning. Non-slip surface.

Pedal bin with soft open/close lid, non-slip rubber ring at the bottom and specially designed pedal to ensure stability during use. The lid design prevents it from hitting the wall when opened. Removable insert with double-sided tape makes it easy to fit binbags inside. The bin’s mechanical parts are all on the inside, facilitating easy cleaning. A roll of binbags included. Volume 4 l.

Runko Unidrain 1500 1000X8 mm.

Kiinnityslaite Unidrain 1003, 800 mm kulma oikealle.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Unidrain Highline RS 700 -paneeli

Rist Unidrain inca, jonka pituus on 1603 ja leveys 800 mm.

Rist Unidrain classic, jonka pituus on 1000 mm.

Horizontal outlet Ø 75 mm, including water trap.

Two horizontal side inlets, 40 mm, which can be opened as needed. 2 rubber adapters are included so that side inlets can be reduced to 32 mm. Easy access to the removable water trap for cleaning. Meets EN1253 standard and is VA approved.

The grate is placed on a recessed bearing in the frame, which ensures precise positioning.

Can only be used with ClassicLine frame.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

Tyhjennysyksikkö takaseinää ja vasenta seinää vasten. Suihkukaappiin, jossa on avoin vasen sivu, lasiseinä tai vastaava. Tyhjennysyksikössä on kaksi seinän flanellia ja kaksi lattian flanellia.

Unidrain water trap for 155012613 and 155012612.

Hook to lift the water trap up from the outlet unit.Suitable for use with line and corner models.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

NB: PVD-treated surface.

Can be freely positioned against the back wall, independent of any side walls. The rear flange has been moved 12 mm backwards, to fit 15 -20mm wall tiles + tile mortar + wetroom membrane.

NB! ClassicLine or HighLine frame must be used.

The set consists of a cassette, rail, heightener set and screws. The set must be assembled before installation. Available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile). Supplement cassette with your own material (e.g. matching floor tile), to complete the solution. The cassette solution is placed directly inside the drain unit. The rail is specially designed to provide a snug fit.

The set consists of a cassette, rail, heightener set and screws. The set must be assembled before installation. Available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile). Supplement cassette with your own material (e.g. matching floor tile), to complete the solution. The cassette solution is placed directly inside the drain unit. The rail is specially designed to provide a snug fit.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

Outlet-talo Unidrain Ø32 vaakasuoraan ilman vesilukkoa.

Sisältää irrotettavan vesiansan (voidaan erottaa ja puhdistaa). 180° kääntyvä, kun tarvitaan taaksepäin suuntautuva ulostulo.